Details

---

BUY 74F541 https://www.utsource.net/itm/p/495363.html
Octal buffer 3- State（）

Parameter	Description	Value
Part Number	High-Speed CMOS Octal Bus Transceiver with Three-State Outputs	74F541
Function	Octal bus transceiver with three-state outputs
Supply Voltage (VCC)	Operating voltage range	4.5V to 5.5V
Input Voltage (VIH/VIL)	Input high/low voltage levels	VIH: 2.0V (min), VIL: 0.8V (max)
Output Voltage (VOH/VOL)	Output high/low voltage levels	VOH: 3.6V (min), VOL: 0.4V (max)
Propagation Delay (tpd)	Time delay from input to output	9ns (typical)
Power Dissipation	Maximum power dissipation	100mW
Operating Temperature	Temperature range for operation	-40°C to +85°C
Storage Temperature	Temperature range for storage	-65°C to +150°C
Package Type	Type of package	DIP, SOIC

Instructions for Use:

1. Power Supply Connection: Connect the VCC pin to a stable 5V supply and GND to ground.
2. Signal Routing: Ensure proper routing of data lines to avoid crosstalk and signal integrity issues.
3. Enable Control: The enable pins (OE1, OE2) control the direction and state of the data transfer. Active low logic is used to enable the device.
4. Decoupling Capacitors: Place decoupling capacitors (0.1μF) close to the VCC and GND pins to reduce noise and improve stability.
5. Pull-Up/Pull-Down Resistors: For unused inputs, connect them to VCC or GND through appropriate pull-up or pull-down resistors to prevent floating states.
6. Handling ESD: Handle the device with care as it is sensitive to electrostatic discharge; use anti-static measures during handling and installation.
7. Heat Management: Ensure adequate heat dissipation if operating near the maximum power dissipation limits.

For detailed specifications and additional information, refer to the manufacturer's datasheet.

(For reference only)