Details

---

BUY SKB52/12 https://www.utsource.net/itm/p/502564.html
Power Bridge Rectifiers

Parameter	Value	Unit
Part Number	SKB52/12	-
Type	Diode Bridge	-
Package	TO-220	-
Maximum Repetitive Peak Reverse Voltage (VRRM)	1200	V
Maximum Average Rectified Output Current (IO)	52	A
Maximum RMS Current (IRMS)	37	A
Junction Temperature (TJ)	-55 to +175	掳C
Storage Temperature (TS)	-55 to +150	掳C

Instructions for Use:

1. Mounting and Handling:

   • Ensure that the device is mounted on a heatsink if operating at or near maximum current ratings.
   • Handle with care to avoid damage to the leads or body.

2. Electrical Connections:

   • Connect the AC input to the two AC terminals of the bridge rectifier.
   • Connect the positive output terminal to the positive side of the load.
   • Connect the negative output terminal to the negative side of the load.

3. Operating Conditions:

   • Do not exceed the maximum reverse voltage (VRRM) as specified in the table.
   • Ensure that the average rectified output current (IO) does not exceed the rated value to prevent overheating and potential failure.
   • Monitor the junction temperature (TJ) to ensure it stays within the operational range.

4. Safety Precautions:

   • Always use appropriate safety measures when handling high-voltage circuits.
   • Ensure proper insulation and isolation to protect against electrical shock.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep the components in their original packaging until ready for use to prevent damage.

(For reference only)