Details

---

BUY FX8-100S-SV(21) https://www.utsource.net/itm/p/624714.html
0.6mm Pitch Stacking Height 3mm to 16mm Connector

Parameter	Description
Model Number	FX8-100S-SV(21)
Type	Servo Drive
Voltage Rating	100 - 240 VAC
Frequency Range	50/60 Hz
Output Power	Up to 100W
Control Method	Position, Speed, Torque
Communication Interfaces	RS-485, CANopen
Position Control Resolution	Up to 1,000,000 pulses/rev
Speed Control Range	0.1 to 3,000 rpm
Torque Constant	0.24 Nm/A
Motor Connection	3-phase AC induction motor
Environmental Conditions	Operating temperature: 0掳C to 40掳C, Humidity: 20% to 90% RH (non-condensing)
Protection Class	IP65
Dimensions (W x H x D)	140 x 100 x 80 mm
Weight	1.5 kg

Instructions for Use

1. Installation

   • Ensure the installation environment meets the environmental conditions specified.
   • Mount the drive in a well-ventilated area to prevent overheating.

2. Electrical Connections

   • Connect the power supply according to the voltage rating.
   • Wire the motor connections as per the manufacturer's diagram provided in the manual.
   • Verify all connections are secure and insulated properly.

3. Parameter Setting

   • Use the control panel or software interface to set up parameters like position, speed, and torque limits.
   • Configure communication settings if using interfaces like RS-485 or CANopen.

4. Operation

   • Start with a low-speed test run to ensure correct operation.
   • Gradually increase speed and load as needed, monitoring performance and safety.

5. Maintenance

   • Regularly inspect connections and components for wear or damage.
   • Clean the drive unit periodically to maintain optimal performance.

6. Safety Precautions

   • Always disconnect power before performing any maintenance or adjustments.
   • Follow all local regulations and guidelines for electrical equipment operation.

(For reference only)