Details

---

BUY FX8-100S-SV https://www.utsource.net/itm/p/624721.html
0.6mm Pitch Stacking Height 3mm to 16mm Connector

Parameter	Description
Model	FX8-100S-SV
Type	Servo Drive Controller
Input Voltage	24V DC
Power Rating	100W
Control Method	Digital Signal Processor (DSP)
Position Control	High-resolution encoder feedback
Speed Range	0 to 3000 RPM
Torque Output	Up to 3Nm
Communication	RS-485, CANopen
Operating Temperature	-10掳C to +50掳C
Storage Temperature	-25掳C to +70掳C
Dimensions	100mm x 80mm x 50mm
Weight	500g

Instructions for Use

1. Installation

   • Ensure the power supply matches the input voltage requirements.
   • Securely mount the drive in a well-ventilated area within the operating temperature range.

2. Connection

   • Connect the motor and encoder cables according to the wiring diagram provided in the manual.
   • Connect the communication interface (RS-485 or CANopen) as required by your system.

3. Setup

   • Power on the controller.
   • Use the configuration software to set up parameters such as speed, torque limits, and position control settings.

4. Operation

   • Test the system at low speeds initially to ensure all connections are correct and secure.
   • Gradually increase the operational parameters as needed.

5. Maintenance

   • Regularly inspect all connections for tightness and corrosion.
   • Keep the drive clean and free from dust and debris to ensure optimal performance.

6. Safety

   • Always disconnect power before performing any maintenance or adjustments.
   • Follow all safety guidelines provided in the manual to prevent injury or damage.

(For reference only)