Details
BUY MK48Z02BU-25 https://www.utsource.net/itm/p/637358.html
CMOS 8K x 8 ZEROPOWER SRAM
Parameter | Description | Value | Unit |
---|---|---|---|
Part Number | Full part identification | MK48Z02BU-25 | - |
Memory Type | Type of memory | SRAM | - |
Capacity | Storage capacity | 2 Mbit | bits |
Organization | Data organization | 262,144 x 8 | - |
Supply Voltage (Vcc) | Operating supply voltage range | 1.7 to 3.6 | V |
Standby Current | Current consumption in standby mode | 0.1 | μA |
Active Current | Current consumption in active mode | 3.0 | mA |
Access Time | Time required for data access | 25 | ns |
Operating Temperature | Temperature range for operation | -40 to +85 | °C |
Package Type | Type of packaging | SOIC-8 | - |
Pin Count | Number of pins | 8 | - |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (Vcc) is within the specified range of 1.7 to 3.6 volts.
Connection:
- Connect the Vcc pin to your power supply and GND pin to ground.
- Ensure all other pins are connected as per the datasheet diagram.
Operation:
- For optimal performance, operate within the specified temperature range (-40°C to +85°C).
- The device supports standard read and write operations typical for SRAM devices.
Handling:
- Handle with care to avoid static damage; use appropriate ESD protection measures.
- Follow manufacturer guidelines for soldering and mounting to ensure reliability.
Standby Mode:
- To enter standby mode, set the chip select pin low and ensure minimal current draw by following the standby current specifications.
Access Timing:
- Ensure that your system's timing requirements match the 25ns access time to prevent data corruption or loss.
View more about MK48Z02BU-25 on main site