Details

---

BUY HMC479MP86 https://www.utsource.net/itm/p/659654.html
SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5.0 GHz

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (Vcc)	Operating supply voltage	4.75	5	5.25	V
Output Power	Output power at P1dB compression point	-	+27	+29	dBm
Gain	Small signal gain	-	20	22	dB
Noise Figure	Noise figure at small signal operation	-	3.5	4	dB
Input IP3	Third-order input intercept point	-	+36	+38	dBm
Output IP3	Third-order output intercept point	-	+48	+50	dBm
Return Loss In	Input return loss	-	15	20	dB
Return Loss Out	Output return loss	-	15	20	dB
Operating Temp Range	Temperature range for guaranteed operation	-40	-	+85	°C

Instructions:

1. Power Supply: Ensure the supply voltage is within the specified range (4.75V to 5.25V) to avoid damage and ensure optimal performance.
2. Biasing: Connect the bias tee to provide proper DC bias to the amplifier. Follow the manufacturer’s guidelines for biasing configurations.
3. Input/Output Matching: Use appropriate matching networks to achieve the desired input and output impedance, typically 50 ohms, to maximize gain and minimize reflections.
4. Heat Dissipation: Given the high output power capabilities, ensure adequate heat sinking or cooling to prevent overheating, especially during continuous operation.
5. Handling Precautions: Handle with care to avoid ESD (Electrostatic Discharge) damage. Use anti-static wrist straps and mats when handling the device.
6. Installation: Mount the amplifier in a location that allows for easy access to connections and provides sufficient space for ventilation.
7. Testing: During initial testing, start with lower input powers and gradually increase while monitoring performance parameters like gain, output power, and temperature.

For detailed specifications and advanced applications, refer to the datasheet provided by the manufacturer.

(For reference only)