Details

---

BUY 1765DPC https://www.utsource.net/itm/p/723791.html

Parameter	Description
Part Number	1765DPC
Type	Digital Panel Meter
Display	3.5-digit LED display
Input Voltage	24 VDC 卤10%
Power Consumption	< 2 W
Input Signal	DC voltage or current
Accuracy	卤0.2% of F.S.
Sampling Rate	3 times per second
Operating Temp	0掳C to +50掳C
Storage Temp	-20掳C to +70掳C
Humidity	10% to 90% RH, non-condensing
Dimensions	48 x 48 x 76 mm (W x H x D)
Weight	200 g
Mounting	Panel mount with 38 mm cutout
Connections	Terminal block for power and signal inputs

Instructions:

1. Power Up: Connect the 24VDC power supply to the designated terminals on the meter.
2. Signal Input: Connect your input signal (voltage or current) to the appropriate input terminals.
3. Mounting: Install the meter in a standard 38mm cutout panel opening. Secure using the provided mounting hardware.
4. Calibration: For accurate readings, calibrate the meter according to the specific input type using the setup menu accessible via front panel buttons.
5. Operation: Once powered and connected, the meter will automatically start displaying the measured value at a sampling rate of 3 times per second.
6. Environmental Considerations: Ensure the operating environment stays within specified temperature and humidity limits to avoid damage or inaccurate readings.
7. Maintenance: Periodically check connections and clean the exterior to maintain performance. Avoid exposing the device to excessive dust or moisture.

(For reference only)