Details

---

BUY TC1413NCPA https://www.utsource.net/itm/p/726270.html
3A High-Speed MOSFET Drivers

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	2.7	-	5.5	V
Output Current	IO	Continuous, TA = 25°C	-	100	-	mA
Quiescent Current	IQ	VIN = VOUT, ILOAD = 0mA	-	3.5	-	μA
Dropout Voltage	VD	IOUT = 100mA, VIN = VOUT + VD	-	0.4	-	V
Shutdown Current	ISD	VIN = 5V, SHDN = GND	-	0.1	-	μA
Load Regulation	ΔVOL	IOUT = 0 to 100mA	-	1.5	-	mV
Line Regulation	ΔVOL	VIN = 2.7V to 5.5V	-	1.5	-	mV
Power Supply Rejection Ratio	PSRR	f = 1kHz	-	60	-	dB
Operating Junction Temperature	TJ	-	-40	-	85	°C

Instructions for TC1413NCPA:

1. Supply Voltage: Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V for proper operation.
2. Output Current: The device can provide a continuous output current up to 100mA at an ambient temperature of 25°C.
3. Quiescent Current: Keep in mind that the quiescent current is typically 3.5μA under no-load conditions.
4. Dropout Voltage: For optimal performance, ensure the dropout voltage does not exceed 0.4V when delivering 100mA.
5. Shutdown Mode: To minimize power consumption, use the shutdown pin (SHDN). When grounded, it reduces the current to approximately 0.1μA.
6. Load and Line Regulation: Both load and line regulation are specified as 1.5mV, ensuring stable output voltage across varying input voltages and loads.
7. Power Supply Rejection Ratio (PSRR): At 1kHz, the PSRR is 60dB, providing effective noise rejection from the power supply.
8. Operating Temperature: The operating junction temperature range is from -40°C to 85°C.

Ensure all connections are correct and adhere to these specifications to achieve reliable operation.

(For reference only)