Details

---

BUY MIC59P60BWM https://www.utsource.net/itm/p/728900.html
8-Bit Serial-Input Protected Latched Driver

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	V_IN	Operating Range	2.7	-	5.5	V
Output Voltage	V_OUT	Fixed Output	-	3.3	-	V
Quiescent Current	I_Q	VI = 3.6V, VO = 3.3V	-	40	-	μA
Dropout Voltage	V_DO	IOUT = 100mA	-	200	-	mV
Load Regulation	ΔV_OUT	IOUT = 0mA to 150mA	-	0.8	-	%
Line Regulation	ΔV_OUT	VIN = 2.7V to 5.5V	-	0.1	-	%
Ground Pin Current	I_GND	IOUT = 150mA	-	1.9	-	mA
Output Current Limit	I_LIMIT	Thermal Shutdown	-	200	-	mA

Instructions for MIC59P60BWM:

1. Input Voltage (V_IN):

   • Ensure the input voltage is within the operating range of 2.7V to 5.5V.

2. Output Voltage (V_OUT):

   • The device provides a fixed output voltage of 3.3V. No external components are required for setting this voltage.

3. Quiescent Current (I_Q):

   • The quiescent current is typically 40μA when the input voltage is 3.6V and the output voltage is 3.3V. Keep this in mind for power budget considerations.

4. Dropout Voltage (V_DO):

   • At an output current of 100mA, the dropout voltage is typically 200mV. This parameter helps in selecting the minimum input voltage required for regulation.

5. Load Regulation:

   • The load regulation is typically 0.8% from no load to full load (0mA to 150mA). This indicates the stability of the output voltage with varying loads.

6. Line Regulation:

   • Line regulation is typically 0.1% over the input voltage range of 2.7V to 5.5V. This ensures that the output voltage remains stable despite changes in input voltage.

7. Ground Pin Current (I_GND):

   • The ground pin current is typically 1.9mA at an output current of 150mA. This is important for thermal management and power dissipation calculations.

8. Output Current Limit (I_LIMIT):

   • The device has a thermal shutdown feature and limits the output current to typically 200mA to protect against overcurrent conditions.

For detailed application circuits and further information, refer to the datasheet provided by the manufacturer.

(For reference only)