Details

---

BUY UC3824DW https://www.utsource.net/itm/p/817093.html
Rad-hard dual retriggerable monostable multivibrator

Parameter	Description	UC3824DW Specifications
Input Voltage Range	Operating range of the input voltage	5V to 16V
Switching Frequency	Frequency at which the controller operates	Adjustable via external resistor
Output Current Limit	Maximum output current before the current limit is triggered	Programmable via external resistor
Shutdown Pin (SHDN)	Input for enabling or disabling the device	Logic high active
Error Amplifier Gain	Gain of the internal error amplifier	Fixed, internally compensated
PWM Comparator Slope	Slope of the PWM comparator	Internally set
Thermal Shutdown	Temperature at which the device will shut down to prevent damage	Typically around 160°C
Package Type	Physical package type	SOIC-8

Instructions:

1. Power Supply Connection: Connect the power supply within the specified input voltage range (5V to 16V) to ensure stable operation.
2. Frequency Setting: Set the switching frequency using an external resistor connected to the RT pin. Refer to the datasheet for specific resistor values.
3. Current Limit Adjustment: Adjust the output current limit by connecting an appropriate resistor to the ILIM pin.
4. Enable/Disable Control: Use the SHDN pin to enable or disable the device. A logic high signal on this pin enables the device; a low signal disables it.
5. Error Amplifier: The error amplifier gain is fixed and internally compensated. No external components are required for this function.
6. Thermal Protection: Monitor the device temperature to avoid exceeding the thermal shutdown threshold. Ensure adequate heat dissipation if operating near maximum temperatures.
7. Installation: Install the UC3824DW in an SOIC-8 package following standard surface mount technology practices.

For detailed design considerations and application circuits, refer to the full datasheet provided by the manufacturer.

(For reference only)