Details

---

BUY SII9025 https://www.utsource.net/itm/p/819210.html
VastLane⑩ HDMI Receiver

Parameter	Description	Value	Unit
Operating Voltage	Supply voltage range for the device	3.0 to 3.6	V
Operating Temperature	Range of temperatures over which the device can operate	-40 to +85	°C
Data Rate	Maximum data rate supported by the device	2.7	Gbps
HDMI Version	Supported HDMI standard	1.4b
Power Consumption	Typical power consumption under normal operation	200	mW
Channel Count	Number of audio channels supported	8	ch
Package Type	Type of package	QFN
Pin Count	Number of pins on the package	40

Instructions for SII9025:

1. Power Supply Setup:

   • Connect the supply voltage (VCC) within the specified range of 3.0V to 3.6V.
   • Ensure stable power supply to avoid operational issues.

2. HDMI Connection:

   • Connect the HDMI input and output ports according to the pin diagram provided in the datasheet.
   • Verify that the connected devices support HDMI 1.4b or lower for compatibility.

3. Audio Configuration:

   • Configure the audio settings to handle up to 8 channels as needed.
   • Adjust audio parameters via the I2C interface if necessary.

4. Temperature Management:

   • Operate the device within the temperature range of -40°C to +85°C.
   • Implement heat dissipation mechanisms if operating near the upper limit.

5. Data Transmission:

   • Ensure that the data transmission rate does not exceed 2.7Gbps to maintain signal integrity.
   • Use high-quality cables and connectors to reduce interference.

6. Installation:

   • Place the device in a location with adequate ventilation to prevent overheating.
   • Follow the PCB layout guidelines provided in the datasheet for optimal performance.

7. Testing:

   • After installation, test the device thoroughly to ensure all functions work as expected.
   • Monitor power consumption and adjust settings if it exceeds typical values.

(For reference only)