Details

---

BUY LM7301IM5X/NOPB https://www.utsource.net/itm/p/833466.html
LM7301 Low Power, 4 MHz GBW, Rail-to-Rail Input-Output Operational Amplifier in TinyPak Package; Package: SOT-23; No of Pins: 5; Qty per Container: 3000/Reel

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	2.7	-	5.5	V
Input Offset Voltage	VOS	VI = 0V to VDD	-1.5	0.4	2.5	mV
Input Bias Current	IB	VI = 0V	-	20	-	nA
Input Offset Current	IOS	VI = 0V	-	6	-	nA
Common Mode Rejection	CMRR	VI = 0V, f = 1kHz	80	-	-	dB
Power Supply Rejection	PSRR	f = 1kHz	90	-	-	dB
Slew Rate	SR	RL = 10kΩ	0.3	-	-	V/μs
Bandwidth (-3dB)	GBW	AV = +1, RL = 10kΩ	1.2	-	-	MHz
Output Voltage Swing	VOSWNG	IOL = 1mA, VO = 0V	-	0.2	-	V
Quiescent Current	IQ	VI = 0V	-	250	-	μA

Instructions for LM7301IM5X/NOPB

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the operating range of 2.7V to 5.5V.

2. Input Signals:

   • Keep input voltages within the common mode range to avoid damage and ensure accurate operation.

3. Biasing:

   • Use appropriate biasing networks for stable operation, especially considering the low input bias current.

4. Output Load:

   • For optimal performance, connect a load resistor (RL) of at least 10kΩ to the output.

5. Temperature Considerations:

   • Operate within the specified temperature range to maintain reliability and performance specifications.

6. PCB Layout:

   • Ensure proper PCB layout with adequate grounding and decoupling capacitors close to the power pins to minimize noise and interference.

7. Handling:

   • Handle with care to avoid electrostatic discharge (ESD), which can damage the component.

8. Testing:

   • Before finalizing designs, thoroughly test the circuit under all expected operating conditions to ensure compliance with design specifications.

(For reference only)