Details

---

BUY LM6172IM/NOPB https://www.utsource.net/itm/p/838005.html
; Package: SOIC NARROW; No of Pins: 8; Qty per Container: 95/Rail

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating Range	2.7	-	5.5	V
Input Voltage Range	Vcm	V- ≤ Vcm ≤ V+	V-	-	V+	V
Output Voltage Swing	Vo	RL = 1 kΩ to V+	V- + 0.2	-	V+ - 0.2	V
Bandwidth	BW	G = +1, RL = 1 kΩ	-	160	-	MHz
Slew Rate	SR		-	300	-	V/μs
Large Signal Bandwidth		G = +1, RL = 1 kΩ	-	140	-	MHz
Unity Gain Frequency	fT		-	800	-	MHz
Input Offset Voltage	Vos	Ta = 25°C	-	0.5	-	mV
Input Bias Current	Ib	Ta = 25°C	-	20	-	nA
Input Capacitance	Cin		-	3	-	pF
Power Supply Rejection	PSRR	f = 1 kHz	-	95	-	dB
Common Mode Rejection	CMRR	f = 1 kHz	-	95	-	dB

Instructions for LM6172IM/NOPB

1. Supply Voltage: Operate within the specified voltage range of 2.7V to 5.5V to ensure optimal performance and reliability.

2. Input Voltage Range: Ensure that the input common-mode voltage (Vcm) stays within the supply rails (V-) to (V+) to prevent damage or unreliable operation.

3. Output Voltage Swing: The output can swing close to the supply rails but typically leaves a small margin (0.2V). Adjust external components accordingly.

4. Bandwidth and Slew Rate: For applications requiring high-speed signal processing, consider the large signal bandwidth (140 MHz) and slew rate (300 V/μs).

5. Unity Gain Frequency: This parameter is crucial for stability considerations in feedback configurations; it should be noted when designing circuits.

6. Offset Voltage and Bias Current: Low input offset voltage (0.5 mV) and bias current (20 nA) make this device suitable for precision applications.

7. Capacitance and Rejection Ratios: Use these parameters for noise reduction and ensuring robustness against power supply and common-mode variations.

8. Installation and Handling: Follow standard ESD precautions during handling and installation to avoid damaging the sensitive internal circuitry.

9. Application Circuits: Refer to the datasheet application notes for specific circuit configurations and recommendations tailored to your application needs.

(For reference only)