Details

---

BUY TLE2084CDW https://www.utsource.net/itm/p/839553.html
EXCALIBUR HIGH-SPEED JFET-INPUT OPERATIONAL AMPLIFIERS

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	2.7	-	5.5	V
Input Offset Voltage	VIO	-	1.5	3.0	mV	TA = 25°C
Input Bias Current	IB	-	5	10	nA	TA = 25°C
Input Offset Current	IOS	-	0.5	1.5	nA	TA = 25°C
Slew Rate	SR	-	0.4	0.6	V/μs
Bandwidth (Small Signal)	BW	-	1.5	2.0	MHz
Output Short-Circuit Duration	tSC	-	Unlimited	-	s

Instructions for Use:

1. Supply Voltage: Ensure the supply voltage is within the specified range of 2.7V to 5.5V to avoid damage or improper operation.
2. Input Signals: Keep input signals within the common-mode voltage range, typically from ground to V_CC - 1.5V.
3. Biasing and Decoupling: Use appropriate decoupling capacitors near the power supply pins to stabilize the supply voltage and reduce noise.
4. Output Load: Ensure the output load resistance is suitable for the intended application, considering the operational amplifier’s output drive capability.
5. Temperature Range: The device is designed to operate within a temperature range of -40°C to +85°C. Ensure environmental conditions do not exceed these limits.
6. Handling: Handle with care to prevent electrostatic discharge (ESD), which can damage the sensitive components.

For detailed specifications and further instructions, refer to the official datasheet provided by the manufacturer.

(For reference only)