Details

---

BUY DG409DJ-E3 https://www.utsource.net/itm/p/848383.html
Multiplexer IC; Multiplexer Type:Analog Differential; No. of Channels:4; Supply Voltage Max:21V; Package/Case:16-DIP; Leaded Process Compatible:Yes; Leakage Current:1uA; On-Resistance, Rdson:100ohm; Mounting Type:Through Hole RoHS Compliant: Yes

Parameter	Description
Part Number	DG409DJ-E3
Type	Analog Switch
Configuration	SPDT (Single Pole Double Throw)
VDD Supply Voltage Range	-5.5V to +5.5V or ±2.25V to ±2.75V
Analog Signal Range	VSS to VDD (Full rail-to-rail signal handling)
On Resistance (RON)	180 Ω (Max) at VDD = ±5V, TA = 25°C
Off Isolation	100 dB (Min) at f = 1 kHz
Switching Time	6 ns (Typical)
Power Dissipation	125 mW (Max) per channel
Operating Temperature Range	-40°C to +85°C
Package	SOIC-8

Instructions for Use:

1. Power Supply Connection: Ensure that the supply voltage (VDD) is within the specified range of -5.5V to +5.5V or ±2.25V to ±2.75V. Connect VSS to the appropriate ground or negative supply.

2. Signal Handling: The analog signals should be within the range from VSS to VDD to avoid distortion or damage.

3. Control Signals: Apply control signals to the appropriate pins to switch between the different throw positions. Refer to the datasheet for specific pin configurations and control logic levels.

4. Installation and Handling: Handle the component with care to avoid ESD damage. Install in a well-ventilated area if operating near the upper temperature limits.

5. Testing: After installation, test the switching functionality and ensure proper operation within the specified parameters. Check for any noise or unwanted signal coupling.

6. Storage: Store in a dry environment away from direct sunlight and extreme temperatures when not in use.

For detailed specifications and advanced applications, refer to the manufacturer's datasheet.

(For reference only)