Details
BUY MAC12HCMG https://www.utsource.net/itm/p/853913.html
Triacs Silicon Bidirectional Thyristors
| Parameter | Description | Value |
|---|---|---|
| Part Number | Identifies the specific component | MAC12HCMG |
| Type | Category of the device | Reed Relay |
| Coil Voltage | Voltage required to activate the relay | 12V DC |
| Coil Current | Current drawn by the coil when activated | 7.5mA |
| Contact Form | Configuration of the contacts | SPDT (Single Pole, Double Throw) |
| Contact Rating | Maximum current and voltage the contacts can handle | 5A at 28V DC |
| Insulation Resistance | Resistance between contacts and coil | >10^9 惟 |
| Dielectric Strength | Maximum voltage the insulation can withstand | 1kV AC for 1 minute |
| Operating Temperature | Range of temperatures where the relay operates reliably | -40掳C to +85掳C |
| Mechanical Life | Number of operations before mechanical failure | 10 million operations |
| Electrical Life | Number of operations before electrical failure | 100,000 operations |
Instructions:
- Installation: Ensure the relay is installed in a location that maintains its operating temperature range.
- Coil Activation: Apply the specified coil voltage to activate the relay. Do not exceed the rated coil current.
- Contact Handling: Do not exceed the contact rating for current and voltage to prevent damage.
- Insulation Maintenance: Regularly check the insulation resistance to ensure it remains above the specified value.
- Testing: Before installation, test the dielectric strength to ensure it meets the minimum requirement.
- Environmental Considerations: Avoid environments that could expose the relay to excessive dust or moisture.
- Handling Care: Handle with care to avoid mechanical damage, especially during installation and maintenance.
View more about MAC12HCMG on main site