Details

---

BUY MCF5206EFT54 https://www.utsource.net/itm/p/942753.html
MCF5206E V2CORE 8KSRAM

Parameter	Description	Value
Device	Microcontroller Unit	MCF5206EFT54
Architecture	ColdFire V2
Core	32-bit CPU
Clock Speed	Maximum Frequency	50 MHz
Flash Memory	Program Memory	512 KB
RAM	Data Memory	64 KB
I/O Pins	General Purpose I/O Pins	87
Analog Inputs	ADC Channels	8
Serial Interfaces	UART, SPI, I2C	2 UARTs, 2 SPIs, 1 I2C
Timers	Timer Modules	4
Watchdog Timer	Watchdog Timer	Yes
Package Type	Packaging Style	LQFP-144
Operating Voltage	Supply Voltage Range	3.0 V to 3.6 V
Operating Temperature	Temperature Range	-40掳C to +85掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the operating range of 3.0 V to 3.6 V.
   • Connect a stable power source and decoupling capacitors close to the power pins.

2. Clock Configuration:

   • Configure the system clock using an external crystal or oscillator connected to the XTAL and XCAP pins.
   • Alternatively, use the internal RC oscillator for less precision requirements.

3. Programming Flash Memory:

   • Use an appropriate programmer compatible with the MCF5206EFT54.
   • Follow the programming guidelines provided in the datasheet for correct flash memory programming.

4. Peripheral Initialization:

   • Initialize UART, SPI, and I2C interfaces as required by your application.
   • Configure timers and ADC channels according to specific timing and analog input needs.

5. Interrupt Handling:

   • Set up interrupt vectors and priorities in the Interrupt Vector Table (IVT).
   • Implement interrupt service routines (ISRs) for handling peripheral interrupts efficiently.

6. Debugging:

   • Utilize the on-chip debug interface for debugging applications.
   • Connect to a debugger tool that supports JTAG or BDM protocols.

7. Application Development:

   • Develop firmware using a supported IDE or compiler toolchain.
   • Test the application thoroughly under various conditions to ensure reliability.

For detailed information, refer to the official datasheet and application notes provided by the manufacturer.

(For reference only)