Details

---

BUY SN74LVTH16245ADGGR https://www.utsource.net/itm/p/974091.html
3.3-V ABT 16-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS

Parameter	Description	Conditions	Min	Typ	Max	Unit
VCC Operating Voltage	Supply voltage range for operation	-	1.65	-	3.6	V
ICC Supply Current	Quiescent supply current per device	VCC = 3.3V, TA = 25掳C	-	40	-	渭A
VOL Output Low Voltage	Output voltage at logic low	IOH = -4mA, VCC = 3.3V, TA = 25掳C	0.2	-	-	V
VOH Output High Voltage	Output voltage at logic high	IOL = 4mA, VCC = 3.3V, TA = 25掳C	-	-	VCC - 0.2	V
IOL Output Low Current	Output current at logic low	VOL = 0.4V, VCC = 3.3V	-	-	-8	mA
IOH Output High Current	Output current at logic high	VOH = 2.4V, VCC = 3.3V	-	-	-4	mA
tpd Propagation Delay Time	Time delay from input to output	VCC = 3.3V, TA = 25掳C	-	7	-	ns
thold Hold Time	Minimum time data must be held stable after clock edge	VCC = 3.3V, TA = 25掳C	-	-	2	ns

Instructions:

1. Power Supply: Ensure the supply voltage (VCC) is within the specified range of 1.65V to 3.6V.
2. Supply Current: Monitor the quiescent supply current, which should not exceed 40渭A under typical conditions.
3. Output Levels: Verify that output voltages (VOH and VOL) meet the specified levels under given load currents.
4. Output Currents: Check that the output currents (IOL and IOH) do not exceed the maximum ratings to prevent damage.
5. Timing Parameters: Ensure propagation delay (tpd) and hold time (thold) meet system timing requirements.
6. Operating Temperature: The device is typically tested at 25掳C; ensure operating conditions are within the specified temperature range for reliable performance.

For detailed specifications and additional information, refer to the official datasheet provided by the manufacturer.

(For reference only)