Details
BUY K04P02T https://www.utsource.net/itm/p/1036252.html
P-channel enhancement mode
| Parameter | Description | Value | Unit |
|---|---|---|---|
| Part Number | Device Identifier | K04P02T | - |
| Input Voltage | Operating Voltage Range | 3.3 to 5.5 | V |
| Output Voltage | Regulated Output Voltage | 3.3 | V |
| Output Current | Continuous Output Current | 200 | mA |
| Quiescent Current | Current Consumption in Operation | 1 | 渭A |
| Dropout Voltage | Typical Dropout Voltage | 0.3 | V |
| Package Type | Physical Package | SOT-23 | - |
| Operating Temp. | Operating Temperature Range | -40 to +85 | 掳C |
Instructions for Use:
Power Supply Connection: Connect the input pin to a power supply within the specified input voltage range (3.3V to 5.5V). Ensure the power source is stable and free from excessive noise.
Output Connection: Connect the output pin to the load that requires a regulated 3.3V supply. Ensure the load current does not exceed the maximum continuous output current of 200mA.
Ground Connection: Connect the ground pin to the common ground of your circuit to ensure proper operation.
Capacitor Placement: Place a bypass capacitor (typically 0.1渭F) close to the input and output pins to stabilize the regulator and reduce noise.
Thermal Consideration: The device can operate within an ambient temperature range of -40掳C to +85掳C. Ensure adequate heat dissipation if operating at high currents or temperatures.
PCB Layout: Follow standard PCB layout practices, ensuring short leads and wide traces to minimize resistance and inductance.
Storage and Handling: Store in a dry environment and handle with care to prevent damage from electrostatic discharge (ESD).
Compliance: Verify that the application complies with relevant safety standards and regulations.
View more about K04P02T on main site