Details

---

BUY MC908AS60ACFN https://www.utsource.net/itm/p/1048509.html
64K FLASH W/2K EEPROM

Parameter	Description	Value/Range
Package Type	The type of package used for the component	SOIC-16
Operating Voltage (VDD)	Range of supply voltage that the device can operate within	2.0 V to 5.5 V
Temperature Range	Operating temperature range	-40掳C to +85掳C
Clock Frequency	Maximum frequency of the internal clock	Up to 20 MHz
Flash Memory Size	Size of non-volatile memory used for program storage	8 KB
RAM Size	Size of volatile memory used for data storage	512 Bytes
I/O Pins	Number of input/output pins available	14
Programmable Timers	Number of programmable timers included	3
Serial Communication	Types of serial communication interfaces supported	SPI, I2C, UART
Interrupt Sources	Number of interrupt sources	19
Low Power Modes	Available low power modes	Stop, Wait, VLPS
Analog-to-Digital Converter (ADC)	Resolution and channels of ADC	8-bit, 8 channels
Digital-to-Analog Converter (DAC)	Resolution and channels of DAC	Not Available

Instructions for Use:

1. Power Supply: Ensure the operating voltage is within the specified range (2.0 V to 5.5 V). Connect the appropriate power supply to VDD and GND pins.
2. Programming: Use an appropriate programmer compatible with the MC908AS60ACFN to load code into the flash memory. Refer to the programming manual for detailed instructions.
3. Clock Configuration: Configure the internal or external clock source as required by your application. The maximum clock frequency is 20 MHz.
4. Pin Configuration: Set up the I/O pins according to your circuit requirements. Refer to the datasheet for pin configurations and functions.
5. Communication Interfaces: Initialize and configure any serial communication interfaces (SPI, I2C, UART) as needed in your software.
6. Interrupt Handling: Enable and manage interrupts based on your application needs using the available interrupt sources.
7. Power Management: Utilize low-power modes (Stop, Wait, VLPS) to optimize power consumption, especially in battery-powered applications.
8. Analog Inputs: If using the ADC, ensure analog signals are within the acceptable input range and properly connected to the designated ADC channels.

For detailed specifications and advanced features, refer to the official datasheet and application notes provided by the manufacturer.

(For reference only)