Details

---

BUY AT24C16A-10PU-2.7 https://www.utsource.net/itm/p/1112836.html
CAP 150UF 10V 20% TANT SMD-6032-28 TR-7

Parameter	Description	Value	Unit
Storage Temperature	Operating temperature range for storage	-55 to +125	°C
Operating Temperature	Operating temperature range	-40 to +85	°C
Supply Voltage Range	Voltage supply range	2.7 to 5.5	V
Capacity	Memory capacity	16 Kbits
Organization	Memory organization	2048 x 8 bits
Package Type	Package type	PDIP
Pin Count	Number of pins	8
Write Cycle Time	Time required for a write cycle	5	ms
Endurance	Guaranteed number of write/erase cycles	1,000,000
Data Retention	Guaranteed data retention period	100	years
Standby Current	Current consumption in standby mode	1	μA
Operating Current	Current consumption during operation	3	mA

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified range (2.7V to 5.5V).
   • Avoid exceeding these limits to prevent damage to the device.

2. Temperature Considerations:

   • Operate within the temperature range (-40°C to +85°C) to ensure reliable performance.
   • Store the device within the storage temperature range (-55°C to +125°C).

3. Write Operations:

   • Allow at least 5ms for each write cycle to complete before initiating another write or read operation.
   • Do not exceed 1,000,000 write/erase cycles to maintain device integrity.

4. Data Integrity:

   • Data can be retained for up to 100 years under proper operating conditions.
   • For optimal data retention, avoid exposing the device to extreme temperatures and voltages outside the specified ranges.

5. Current Consumption:

   • In standby mode, the device consumes approximately 1μA.
   • During active operations, it consumes around 3mA.

6. Installation:

   • Ensure correct orientation when installing into the PDIP socket.
   • Verify pin connections are secure and correctly aligned.

7. Handling Precautions:

   • Handle with care to avoid static discharge which can damage the component.
   • Follow ESD (Electrostatic Discharge) precautions during handling and installation.

(For reference only)