Details

---

BUY SN74LVC8T245RHLR https://www.utsource.net/itm/p/1113606.html
8-BIT DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS

Parameter	Min	Typ	Max	Unit	Description
Supply Voltage (VCC)	1.65		3.6	V	Operating supply voltage range
Output Voltage (VOH)			VCC-0.1	V	Output high-level voltage (when sourcing current)
Output Voltage (VOL)	0		0.2	V	Output low-level voltage (when sinking current)
Input Voltage (VIH)	2.0		VCC	V	Input high-level voltage
Input Voltage (VIL)	0		0.8	V	Input low-level voltage
Propagation Delay (tpd)		4.8		ns	Time delay for signal to propagate from input to output
Power Dissipation			500	mW	Maximum power dissipation
Operating Temperature	-40		85	掳C	Ambient operating temperature range

Instructions:

1. Power Supply Connection: Ensure the VCC pin is connected to a stable power supply within the specified range of 1.65V to 3.6V.
2. Ground Connection: Connect the GND pin to the system ground.
3. Signal Levels: Inputs should be driven by voltages within the VIH and VIL limits to ensure proper logic levels are recognized.
4. Output Handling: Outputs can drive loads that respect the VOH and VOL specifications, ensuring reliable logic levels.
5. Propagation Delay Consideration: Account for the propagation delay in timing calculations for synchronous circuits.
6. Thermal Management: Keep the device within the specified operating temperature range. Use heatsinks or other cooling methods if necessary to manage heat, especially under high power conditions.
7. Storage and Handling: Handle with care to avoid electrostatic discharge (ESD) damage. Store in anti-static packaging when not in use.

This table and set of instructions provide essential information for using the SN74LVC8T245RHLR effectively and safely.

(For reference only)