Details

---

BUY SN74ALVC164245DLR https://www.utsource.net/itm/p/1126441.html
OCTAL BUS TRANSCEIVERS

Parameter	Conditions	Min	Typ	Max	Unit
Supply Voltage (VCC)	Operating	1.65		3.6	V
Output Drive Current (IOH)	VCC = 3.6V, VOH = 2.4V	-	-8	-	mA
Output Drive Current (IOL)	VCC = 3.6V, VOL = 0.4V	-	16	-	mA
Input Leakage Current (II)	VIN = 0V to VCC	-	卤1	-	渭A
Propagation Delay Time (tpd)	VCC = 3.6V	2.5		4.5	ns
Power Dissipation (PD)	Operating	-		360	mW
Operating Temperature Range		-40		85	掳C
Storage Temperature Range		-65		150	掳C

Instructions for SN74ALVC164245DLR:

1. Power Supply Connection:

   • Connect VCC to the positive power supply within the range of 1.65V to 3.6V.
   • Connect GND to the system ground.

2. Signal Handling:

   • Ensure all input signals are within the specified voltage range relative to VCC and GND.
   • Use appropriate pull-up or pull-down resistors if necessary to stabilize inputs.

3. Output Load Considerations:

   • Do not exceed the maximum output current ratings (IOH and IOL).
   • Keep the total power dissipation within the device's limits by considering the thermal resistance and ambient temperature.

4. Propagation Delay:

   • Account for the propagation delay when designing timing-sensitive circuits to ensure reliable operation.

5. Environmental Conditions:

   • Operate the device within the specified temperature ranges to avoid damage or unreliable performance.
   • Store the device in a controlled environment that does not exceed the storage temperature limits.

6. Handling Precautions:

   • Handle with care to prevent electrostatic discharge (ESD) damage. Use proper ESD protection measures during handling and assembly.

7. Mounting and Assembly:

   • Follow standard surface-mount technology (SMT) procedures for mounting on PCBs.
   • Ensure proper alignment and soldering to maintain electrical integrity and mechanical stability.

(For reference only)