Details

---

BUY MC14584BDR2 https://www.utsource.net/itm/p/1127470.html
3-Channel Supervisor for Switch-Mode Power Supplies 8-PDIP -40 to 85

Parameter	Description	Value	Unit
Package Type	Package type	SOIC-16
Operating Temperature	Operating temperature range	-40 to 125	掳C
Supply Voltage Range	Minimum and maximum supply voltage	3.0 to 18.0	V
Propagation Delay Time	Propagation delay time	50	ns
Power Dissipation	Maximum power dissipation	390	mW
Storage Temperature	Storage temperature range	-65 to 150	掳C
Input Current	Maximum input current	1.0	渭A
Output Current	Maximum output current	15.0	mA

Instructions for MC14584BDR2

1. Power Supply Connection:

   • Connect the Vcc pin to the positive supply voltage within the specified range (3.0V to 18.0V).
   • Connect the GND pin to the system ground.

2. Signal Handling:

   • Ensure that all input signals are within the operating voltage range of the device.
   • Do not exceed the maximum input current rating of 1.0渭A.

3. Output Load:

   • The output can drive a load up to 15mA. Ensure that the connected load does not exceed this limit to avoid damaging the IC.

4. Thermal Considerations:

   • Monitor the power dissipation, which should not exceed 390mW to prevent overheating.
   • If operating in high ambient temperatures or with high power dissipation, consider adding heat sinks or improving airflow around the component.

5. Storage and Handling:

   • Store the device in an environment where the temperature does not drop below -65掳C or rise above 150掳C.
   • Handle with care to avoid damage from electrostatic discharge (ESD).

6. Propagation Delay:

   • Account for the propagation delay of 50ns when designing timing-sensitive circuits.

7. Operating Environment:

   • Ensure that the device operates within the specified temperature range (-40掳C to 125掳C) for reliable performance.

For detailed application notes and further information, refer to the manufacturer's datasheet.

(For reference only)