Details

---

BUY RS5C583 https://www.utsource.net/itm/p/1253166.html
ULTRA-COMPACT REAL-TIME CLOCK IC

Parameter	Description	Conditions	Min	Typ	Max	Unit
Supply Voltage (VCC)	Operating supply voltage range		1.8		5.5	V
Standby Current	Current consumption in standby mode	VCC = 3.0V		0.2		渭A
Operating Current	Current consumption during operation	VCC = 3.0V, fosc = 32.768kHz		0.9		渭A
Frequency Range	Oscillator frequency range		32.768		32.768	kHz
Temperature Range	Operating temperature range		-40		85	掳C
Output Voltage High	Logic high output voltage	IOH = -1.0mA		4.5		V
Output Voltage Low	Logic low output voltage	IOL = 1.6mA		0.4		V

Instructions for RS5C583:

1. Power Supply Connection:

   • Connect the VCC pin to a power supply within the specified voltage range (1.8V to 5.5V).
   • Ensure a stable and clean power supply to avoid noise affecting the device performance.

2. Oscillator Configuration:

   • The RS5C583 uses an external 32.768 kHz crystal oscillator for timing.
   • Properly connect the crystal and load capacitors as per the manufacturer's guidelines to ensure accurate timekeeping.

3. Standby Mode:

   • To enter standby mode, set the appropriate control signal or use the provided register settings.
   • This reduces current consumption significantly, useful for battery-operated devices.

4. Operating Mode:

   • For normal operation, ensure the oscillator is running and the device is configured to perform its intended functions.
   • Monitor the operating current to ensure it stays within typical values for efficient power usage.

5. Temperature Considerations:

   • Operate the device within the specified temperature range (-40掳C to 85掳C) to maintain reliable performance.
   • Extreme temperatures can affect the accuracy of the real-time clock function.

6. Output Handling:

   • When interfacing with other circuits, ensure that the logic levels (high and low voltages) are compatible with the connected devices.
   • Use appropriate pull-up or pull-down resistors if necessary to stabilize the output signals.

7. Programming and Setup:

   • Refer to the datasheet for specific programming instructions and register configurations.
   • Utilize initialization routines to set up the device according to your application requirements.

(For reference only)