Details

---

BUY NJM318D https://www.utsource.net/itm/p/1260431.html
PRECISION HIGH-SPEED OPERATIONAL AMPLIFIER

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC		4.5	5	16	V
Quiescent Current	ICC	VS = ±5V		3.6		mA
Input Offset Voltage	VIO	VS = ±5V	-1	0	1	mV
Input Bias Current	IB	VS = ±5V, RL = 2kΩ		1		nA
Slew Rate	SR	VS = ±5V		0.3		V/μs
Large Signal Voltage Gain	AV	VS = ±5V		100		dB
Common Mode Rejection Ratio	CMRR	VS = ±5V		70		dB
Power Supply Rejection Ratio	PSRR	VS = ±5V		80		dB

Instructions for Use:

1. Power Supply: Ensure the supply voltage is within the specified range (4.5V to 16V). The NJM318D can operate with a single or dual power supply.
2. Quiescent Current: Keep in mind the typical quiescent current of 3.6mA at ±5V supply to manage power consumption efficiently.
3. Input Signals: Be aware of the input offset voltage which can be between -1mV and +1mV under typical conditions. This may affect precision applications.
4. Bias Current: The low input bias current (typically 1nA) allows for high impedance sources without significant loading effects.
5. Slew Rate: The slew rate is 0.3V/μs, which should be considered for fast signal applications to avoid distortion.
6. Gain Considerations: With a large signal voltage gain of 100dB, this device is suitable for applications requiring high gain amplification.
7. Rejection Ratios: Utilize the common mode rejection ratio (CMRR) and power supply rejection ratio (PSRR) to mitigate noise from power supply variations and common-mode signals.

Always refer to the specific application notes and datasheets provided by the manufacturer for detailed guidance on using the NJM318D in various circuit configurations.

(For reference only)