Details

---

BUY 74F14SC https://www.utsource.net/itm/p/1333354.html
Hex Inverter Schmitt Trigger; Package: SOIC; No of Pins: 14; Container: Rail

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Propagation Delay Time	tpd	VCC = 5V, TA = 25°C		6		ns
Power Supply Voltage	VCC		4.75	5	5.25	V
Input Low Voltage	VIL			0.8		V
Input High Voltage	VIH			2		V
Output Low Voltage	VOL			0.4		V
Output High Voltage	VOH			2.4		V
Input Leakage Current	IIL			1		μA
Output Source Current	IOH			4		mA
Output Sink Current	IOL			8		mA

Instructions for Use:

1. Power Supply: Ensure the power supply voltage (VCC) is within the specified range of 4.75V to 5.25V.
2. Input Signals: Apply input signals that meet the minimum and maximum voltage levels for low (VIL) and high (VIH) states.
3. Output Load: Connect loads that do not exceed the output source current (IOH) and sink current (IOL) capabilities.
4. Propagation Delay: Account for the propagation delay time (tpd) in your timing calculations to ensure proper signal processing.
5. Environmental Conditions: The device is typically characterized at a temperature of 25°C. Ensure operating conditions are within the specified environmental limits.
6. Handling: Handle with care to avoid damage from electrostatic discharge (ESD). Use appropriate ESD protection measures during installation.

Note: This table and instructions are based on typical parameters for a 74F14SC component. Always refer to the manufacturer's datasheet for the most accurate and detailed specifications.

(For reference only)