Details

---

BUY P28F001BXT150 https://www.utsource.net/itm/p/1392044.html
1-MBIT 128K x 8 BOOT BLOCK FLASH MEMORY

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	1.7	-	3.6	V	Operating supply voltage range
Standby Current	ISB	-	0.5	2	渭A	Typical current in standby mode
Active Current	IOP	-	1	3	mA	Typical current in active mode
Output Current per Pin	IOH/IOL	-	20	40	mA	Output high/low current capability
Operating Temperature	Toper	-40	-	85	掳C	Operating temperature range
Storage Temperature	Tstg	-65	-	150	掳C	Storage temperature range
ESD Rating	HBM	-	-	2	kV	Human Body Model Electrostatic Discharge rating

Instructions for P28F001BXT150:

1. Power Supply Connection:

   • Connect the VDD pin to a stable power supply within the specified voltage range (1.7V to 3.6V).
   • Ensure proper decoupling capacitors are placed close to the VDD pin to minimize noise and improve stability.

2. Standby Mode:

   • To enter standby mode, set the appropriate control signal as defined in the device datasheet.
   • Monitor the ISB current to ensure it stays within the typical range of 0.5渭A to 2渭A.

3. Active Mode Operation:

   • When operating in active mode, ensure the IOP current does not exceed the maximum limit of 3mA to avoid overheating or damage.

4. Output Pin Usage:

   • Each output pin can source or sink up to 40mA. For reliable operation, do not exceed 20mA continuously.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to +85掳C for optimal performance.
   • Store the device in environments where temperatures do not exceed -65掳C to +150掳C.

6. ESD Protection:

   • Handle the device with care to avoid exposure to electrostatic discharge.
   • Use appropriate ESD protection measures when handling or assembling the component to prevent damage.

For detailed specifications and additional information, refer to the full datasheet provided by the manufacturer.

(For reference only)