Details

---

BUY ILD213E https://www.utsource.net/itm/p/1393335.html
DUAL PHOTOTRANSISTOR SMALL OUTLINE SURFACE MOUNT OPTOCOUPLER

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	2.7	-	5.5	V	Operating input voltage range
Output Voltage	VOUT	-	3.3	-	V	Fixed output voltage
Quiescent Current	IQ	-	10	-	渭A	Supply current in regulation
Load Current	IOUT	-	200	-	mA	Maximum continuous output current
Dropout Voltage	VDROPOUT	-	250	-	mV	Typical dropout voltage at IOUT=200mA
Shutdown Current	ISD	-	1	-	渭A	Supply current in shutdown
Operating Temp	TOPR	-40	-	85	掳C	Operating temperature range

Instructions for ILD213E:

1. Input Connection: Connect the input voltage (VIN) to the input pin. Ensure the input voltage is within the specified range of 2.7V to 5.5V.
2. Output Connection: The output pin provides a fixed 3.3V. Connect this pin to the load or circuit requiring power.
3. Ground Connection: Ensure a common ground connection between the input, output, and any external circuits.
4. Load Requirements: The device can supply up to 200mA continuously. Ensure the load does not exceed this limit.
5. Thermal Considerations: Operate within the temperature range of -40掳C to 85掳C. For higher ambient temperatures, ensure adequate heat dissipation.
6. Shutdown Functionality: Use the shutdown pin to control the operation of the regulator. In shutdown mode, the supply current drops to approximately 1渭A.
7. Capacitor Selection: Place appropriate input and output capacitors close to the device to ensure stability and filter noise. Typically, 1渭F ceramic capacitors are recommended for both input and output.

For detailed design considerations and specific application notes, refer to the datasheet provided by the manufacturer.

(For reference only)