Details

---

BUY UM2316 https://www.utsource.net/itm/p/1394715.html
PIN DIODE

Parameter	Description	Value
Part Number	Unique identifier for the component	UM2316
Type	Type of device	Microcontroller
Package	Physical package type	DIP, SOP
Operating Voltage	Range of voltages at which the device can operate	2.0V to 5.5V
Flash Memory	Non-volatile memory for storing code and data	16KB
RAM	Volatile memory for temporary data storage	512B
Clock Speed	Maximum frequency of the internal or external clock	16MHz
I/O Pins	Number of input/output pins	20
Analog Inputs	Number of analog-to-digital converter channels	8
UART Interfaces	Number of serial communication interfaces	1
SPI Interfaces	Number of serial peripheral interfaces	1
I2C Interfaces	Number of inter-integrated circuit interfaces	1
Timer/Counters	Number of timer/counters available	2
Watchdog Timer	Feature that resets the processor if it hangs	Yes
Operating Temp.	Temperature range in which the device can operate	-40掳C to +85掳C

Instructions for UM2316

1. Power Supply Connection:

   • Connect the VCC pin to your power supply (2.0V to 5.5V).
   • Ensure the GND pin is connected to the ground.

2. Clock Configuration:

   • Use an external crystal oscillator or configure the internal RC oscillator depending on the desired clock speed up to 16MHz.

3. Programming:

   • Program the flash memory using an ISP (In-System Programming) programmer compatible with the UM2316.
   • Refer to the datasheet for specific programming protocols and voltage levels.

4. Pin Configuration:

   • Configure the I/O pins as inputs or outputs via software settings.
   • Utilize the ADC channels by connecting analog signals to the designated pins.

5. Communication Interfaces:

   • Set up UART, SPI, and I2C interfaces according to the application requirements.
   • Initialize these interfaces through configuration registers.

6. Timer and Counter Usage:

   • Configure timers/counters for time-based operations or counting pulses.
   • Enable interrupts from timers if periodic tasks need execution.

7. Watchdog Timer:

   • Enable the watchdog timer to ensure the microcontroller resets if a hang occurs.
   • Periodically refresh the watchdog timer in your main loop to prevent unintended resets.

8. Operating Environment:

   • Ensure the operating temperature stays within -40掳C to +85掳C to maintain reliable operation.
   • Protect against electrostatic discharge (ESD) when handling the device.

For detailed information, refer to the official datasheet and application notes provided by the manufacturer.

(For reference only)