Details

---

BUY SN75189AD https://www.utsource.net/itm/p/1402364.html
Quadruple Differential Line Driver 16-PDIP 0 to 70

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc		4.5		5.5	V
Output Voltage High Level	VOH	IO = -1 mA		2.4		V
Output Voltage Low Level	VOL	IO = 16 mA		0.4		V
Input Current	IIH	VI = Vcc	-1			μA
	IIL	VI = 0 V	1			μA
Propagation Delay Time	tpd	VIN to VOUT	35		85	ns
Power Dissipation	PD			150		mW

Instructions for SN75189AD

1. Power Supply: Ensure the supply voltage (Vcc) is within the specified range of 4.5V to 5.5V.
2. Input Signal Levels: Apply input signals that are compatible with the device's logic levels. For high-level inputs, ensure the current does not exceed the specified limits.
3. Output Handling: When connecting loads to the output, make sure the currents do not exceed the maximum ratings to avoid damaging the device.
4. Propagation Delay: Account for the propagation delay in timing-sensitive applications. The typical delay is around 60ns under standard conditions.
5. Thermal Considerations: Monitor the power dissipation to prevent overheating. Keep within the maximum power dissipation limit of 150mW.
6. Storage and Handling: Follow proper storage and handling procedures to prevent damage from electrostatic discharge (ESD).

Note: Always refer to the manufacturer's datasheet for the most accurate and detailed information.

(For reference only)