Details

---

BUY TLP641G https://www.utsource.net/itm/p/1403416.html
Thyrister Output Photocouplers and Photorelays; Features: Standard; Package: DIP6; Surface Mount Type: Y/N; Number of Pins: 6; Trigger LED Current I_FT, max mA: 7; On-state voltage V_TM @I_TM=100mA max V: 1.3; Peak off-state voltage V_DRM max V: 400; Isolation voltage BVs @1minute min V_rms: 5000

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 10 mA		1.2	1.6	V
Peak Forward Current	IFM	t = 1 ms, Repetition Rate = 100/s			30	mA
Reverse Voltage	VR				5	V
Output Current	ICM	tp = 1 ms			0.5	A
Isolation Voltage	VIORM	1 minute, 50/60 Hz			5000	Vrms
Turn-ON Time	ton	IF = 10 mA, IL = 10 mA		4	6	μs
Turn-OFF Time	toff	IF = 10 mA, IL = 10 mA		2	4	μs

Instructions for Use:

1. Mounting and Handling:

   • Handle the TLP641G with care to avoid mechanical damage.
   • Ensure proper heat dissipation if operating at high currents.

2. Electrical Connections:

   • Connect the forward current (IF) source to the appropriate terminals.
   • Ensure reverse voltage (VR) does not exceed the maximum rating.

3. Operating Conditions:

   • Operate within specified temperature and humidity ranges to ensure reliable performance.
   • Avoid exceeding peak forward current (IFM) and output current (ICM) ratings.

4. Safety Precautions:

   • Respect isolation voltage (VIORM) limits to prevent electrical hazards.
   • Implement adequate safety measures when working with high voltages.

5. Testing and Troubleshooting:

   • Measure turn-on and turn-off times under typical conditions to verify correct operation.
   • If issues arise, check all connections and ensure parameters are within specified limits.

For detailed specifications and additional information, refer to the official datasheet provided by Toshiba.

(For reference only)