Details

---

BUY OP2177ARZ-REEL https://www.utsource.net/itm/p/1433300.html
Precision, Dual, Low Noise Low Input Bias Current Operational Amplifiers

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.7		5.5	V
Input Offset Voltage	VIO	@ TA = +25°C	-0.1	0	+0.1	mV
Input Bias Current	IB	@ TA = +25°C, RL = 10kΩ	-10	0	+10	nA
Input Voltage Range	VI	Common Mode	VEE - 0.3		VCC - 1.5	V
Output Voltage Swing	VO	No Load	VEE + 0.1		VCC - 0.1	V
Slew Rate	SR	Small Signal		0.4		V/μs
Bandwidth	BW	Unity Gain		1.2		MHz
Power Supply Rejection	PSRR	@ 1kHz		86		dB
Common-Mode Rejection	CMRR	@ TA = +25°C		94		dB

Instructions for OP2177ARZ-REEL

1. Power Supply Requirements:

   • Ensure the supply voltage (V_CC) is within the range of 2.7V to 5.5V.

2. Input Signal Handling:

   • Keep the input voltages within the common mode input voltage range.
   • Be mindful of the input offset voltage and bias current when designing circuits to minimize errors.

3. Output Configuration:

   • The output can swing close to the supply rails, but ensure there's a margin as specified in the table to avoid distortion or damage.

4. Frequency Response:

   • For applications requiring high-frequency operation, consider the bandwidth limitation at unity gain.
   • Use appropriate compensation techniques if operating near the slew rate limit.

5. Noise and Interference Mitigation:

   • Utilize the power supply rejection ratio (PSRR) and common-mode rejection ratio (CMRR) to design robust circuits that are less susceptible to noise.

6. Handling and Storage:

   • Store the device in an ESD-safe environment.
   • Handle with care to prevent physical damage to pins and the package.

7. Mounting:

   • Follow standard surface-mount technology (SMT) procedures for mounting.
   • Ensure proper thermal management if used in high-power or high-temperature environments.

(For reference only)