Details

---

BUY YPPD-J010A https://www.utsource.net/itm/p/1551333.html

Parameter	Description	Value
Part Number	Product Identifier	YPPD-J010A
Type	Device Type	Photoelectric Sensor
Detection Method	Sensing Technology	Diffuse Reflective
Operating Voltage	Supply Voltage Range	10 to 30 VDC
Current Consumption	Max. Supply Current	40 mA
Response Time	Time to Detect Object	1 ms (typical)
Detection Distance	Effective Range	5 to 80 mm
Output Type	Electrical Output	NPN Open Collector
Output Current	Max. Load Current	100 mA
Ambient Temperature	Operating Temp. Range	-25掳C to +70掳C
Storage Temperature	Non-Operating Temp. Range	-40掳C to +85掳C
Housing Material	Enclosure	Resin
Lens Material	Light Transmission Medium	Polycarbonate
Mounting	Installation Method	M3 screws
Weight	Unit Mass	20 g

Instructions for Use:

1. Power Supply: Connect the sensor to a power supply within the operating voltage range (10 to 30 VDC). Ensure the polarity is correct to avoid damage.
2. Mounting: Secure the sensor using M3 screws in a location that provides an unobstructed view of the detection area.
3. Alignment: Adjust the sensor position to ensure the target object falls within the specified detection distance (5 to 80 mm).
4. Output Connection: Connect the output terminal to your control system. The sensor uses an NPN open collector output, which requires a pull-up resistor if not already present in the control circuit.
5. Testing: Verify the sensor's operation by placing an object within the detection range and observing the output response time (should be approximately 1 ms).
6. Environmental Considerations: Operate the sensor within the recommended ambient temperature range (-25掳C to +70掳C) for optimal performance.
7. Maintenance: Keep the lens clean and free from obstructions or debris that could interfere with detection accuracy.

For detailed specifications and troubleshooting, refer to the manufacturer's datasheet or contact customer support.

(For reference only)