Details

---

BUY KA2506-01 https://www.utsource.net/itm/p/1557277.html
I I C Bus Controlled R/G/B Video AMP for MonitorsIICR/G/B

Parameter	Description	Value
Part Number	KA2506-01
Type	3-Axis Accelerometer
Interface	SPI/I2C
Supply Voltage	Operating Voltage Range	1.71V to 3.6V
Output Data Rate	ODR Selection	1.56Hz to 1.6kHz
Sensitivity	Typical Sensitivity at 卤2g	18.4 LSB/mg
Measurement Range	Full-Scale Range	卤2g/卤4g/卤8g
Package Type	LGA (Land Grid Array)	3x3mm
Operating Temp	Temperature Range	-40掳C to +85掳C
Dimensions	Package Size	3mm x 3mm x 0.9mm

Instructions for Use:

1. Power Supply Connection:

   • Connect the supply voltage pin (VDD) to a power source within the specified range of 1.71V to 3.6V.
   • Ensure the ground (GND) pin is connected to the system ground.

2. Interface Configuration:

   • Choose either SPI or I2C interface depending on your application requirements.
   • Configure the necessary pins for communication:
     • For SPI: MOSI, MISO, SCK, and CS
     • For I2C: SDA and SCL

3. Initialization:

   • After powering the device, initialize it using the appropriate configuration registers via the selected interface.
   • Set the desired output data rate (ODR) and full-scale range according to your application needs.

4. Data Acquisition:

   • Once configured, the sensor will start providing acceleration data.
   • Read the data from the output registers periodically based on your application's timing requirements.

5. Handling and Mounting:

   • Handle the component with care to avoid damage to the sensitive internal components.
   • Mount the package on a stable PCB surface ensuring proper alignment and soldering connections.

6. Environmental Considerations:

   • Operate the device within the specified temperature range (-40掳C to +85掳C) to ensure reliable performance.
   • Protect the device from excessive shock or vibration which can affect measurement accuracy.

(For reference only)