Details
BUY 6R1MBI100P-160 https://www.utsource.net/itm/p/1570357.html
Power-Supply Monitor with Reset
| Parameter | Description |
|---|---|
| Part Number | 6R1MBI100P-160 |
| Type | Metal Oxide Varistor (MOV) |
| Nominal Voltage (VAC) | 6.8 V |
| Energy Absorption (J) | 100 J |
| Diameter | 10.0 mm |
| Height | 5.4 mm |
| Maximum Clamping Voltage (V) | 23.9 V at 10 A peak pulse current |
| Response Time | < 25 ns |
| Terminal Type | Radial Leads |
| Operating Temperature | -40掳C to +85掳C |
| Standards/Approvals | UL, CSA, VDE |
Instructions for Use:
- Mounting: Ensure that the varistor is mounted on a flat surface with adequate clearance from other components to avoid short circuits.
- Lead Handling: Handle the leads carefully to prevent damage. Avoid excessive bending or twisting.
- Soldering: Use a soldering iron temperature not exceeding 260掳C and complete soldering within 5 seconds. Allow sufficient cooling time after soldering.
- Environmental Conditions: Ensure that the operating environment stays within the specified temperature range to maintain optimal performance.
- Energy Absorption: The device is designed to handle transient voltage spikes up to its rated energy absorption capacity. Ensure that the application does not exceed this limit.
- Inspection: Regularly inspect the varistor for signs of physical damage or discoloration which may indicate degradation or failure.
- Disposal: Dispose of the component according to local regulations for electronic waste.
View more about 6R1MBI100P-160 on main site