Details

---

BUY SG-615PHC-40.0000M https://www.utsource.net/itm/p/1708548.html
SMD TYPE HIGH FREQUENCY CRYSTAL OSCILLATOR

Parameter	Value	Unit
Part Number	SG-615PHC-40.0000M
Type	Crystal Oscillator
Frequency	40.0000	MHz
Frequency Tolerance	卤20	ppm
Load Capacitance	12	pF
Operating Temperature	-20 to +70	掳C
Supply Voltage	3.3	V
Output Type	CMOS
Package	Ceramic SMD
Mounting Style	Surface Mount

Instructions:

1. Handling: Handle the SG-615PHC-40.0000M with care to avoid damage to the ceramic package. Use appropriate ESD protection measures.
2. Mounting: Ensure that the mounting orientation is correct as per the datasheet diagram. Apply solder paste evenly and reflow according to the recommended temperature profile.
3. Power Supply: Connect the oscillator to a stable 3.3V power supply. Verify that the voltage levels are within tolerance before powering on.
4. Decoupling Capacitors: Place decoupling capacitors close to the power pins of the oscillator to minimize noise and ensure stable operation.
5. Load Capacitance: The load capacitance should be set to 12pF for optimal performance. Adjust if necessary based on PCB layout and other components.
6. Testing: After installation, test the frequency output to ensure it matches the specified 40.0000MHz 卤20ppm. Adjust any external factors affecting the frequency as needed.
7. Operating Environment: Operate the device within the temperature range of -20掳C to +70掳C to ensure reliable performance. Avoid exposing the device to excessive humidity or mechanical stress.

(For reference only)