Details

---

BUY MSM82C59A-2RS https://www.utsource.net/itm/p/1709943.html
PROGRAMMABLE INTERRUPT CONTROLLER

Parameter	Description	Value	Unit
Part Number	Full part number	MSM82C59A-2RS	-
Type	Device type	Bearing	-
Series	Series	82C59A	-
Bore Diameter	Diameter of the bore	5	mm
Outer Diameter	Diameter of the outer surface	16	mm
Width	Width of the bearing	5	mm
Dynamic Load Rating	Maximum dynamic load rating	4.7	kN
Static Load Rating	Maximum static load rating	3.0	kN
Rated Speed	Maximum speed at which the bearing is rated	11000	rpm
Seal Type	Type of seal on the bearing	Rubber Seals	-
Lubrication	Pre-filled lubricant	Grease	-
Cage Material	Material used for the cage	Steel	-
Operating Temperature	Range of operating temperatures	-20 to +120	掳C
Noise Level	Noise level when operating	Low	-

Instructions:

1. Installation:

   • Ensure that the shaft and housing are clean and free from any debris.
   • Use appropriate tools to press-fit the bearing onto the shaft or into the housing without applying force directly to the rolling elements.

2. Lubrication:

   • The bearing is pre-lubricated with grease. Additional lubrication may be necessary depending on the application and operating conditions.
   • Avoid mixing different types of grease as this can lead to reduced performance.

3. Maintenance:

   • Regularly inspect the bearing for signs of wear, noise, or vibration.
   • Replace the bearing if any damage is detected.

4. Handling:

   • Handle the bearing carefully to avoid dropping or impacting it, as this can cause internal damage.
   • Store in a dry, cool place away from corrosive substances.

5. Operating Conditions:

   • Operate within the specified temperature range to ensure optimal performance.
   • Do not exceed the rated speed to prevent premature wear or failure.

6. Sealing:

   • The rubber seals help protect against contaminants but should be inspected periodically to ensure they remain intact and effective.

(For reference only)