Details

---

BUY SED1180F5A https://www.utsource.net/itm/p/1712633.html
CMOS DOT MATRIX LCD CONTROLLER DRIVER

Parameter	Description	Value	Unit
Supply Voltage	Operating voltage range for the device	2.7 to 5.5	V
Operating Temperature	Temperature range for reliable operation	-20 to +70	掳C
Storage Temperature	Temperature range for storage without damage	-40 to +85	掳C
Interface Type	Communication interface type	SPI
Data Rate	Maximum data transfer rate	10	Mbps
Power Consumption	Typical power consumption in active mode	30	mW
Standby Current	Current consumption in standby mode	1	渭A
Package Type	Physical package of the component	SOP-8

Instructions for SED1180F5A

1. Powering the Device:

   • Connect the supply voltage (Vcc) within the specified range of 2.7V to 5.5V.
   • Ensure a stable power supply to avoid erratic behavior.

2. Communication Setup:

   • Use SPI interface for communication with the microcontroller or processor.
   • Set up the SPI settings according to the specifications provided in the datasheet.

3. Operating Environment:

   • Operate the device within the temperature range of -20掳C to +70掳C for optimal performance.
   • Store the device between -40掳C and +85掳C to prevent physical damage.

4. Data Transfer:

   • Ensure data transfer rates do not exceed 10 Mbps to maintain integrity and reliability.

5. Power Management:

   • In active mode, expect a typical power consumption of around 30 mW.
   • When not actively communicating, put the device into standby mode to reduce current consumption to approximately 1 渭A.

6. Physical Handling:

   • Handle the SOP-8 packaged device with care to avoid mechanical damage.
   • Follow anti-static precautions during handling and installation.

For detailed information, refer to the specific application notes and datasheets provided by the manufacturer.

(For reference only)