Details

---

BUY CM50DU-24H https://www.utsource.net/itm/p/1723346.html
MEDIUM POWER SWITCHING USE INSULATED TYPE

Parameter	Description
Part Number	CM50DU-24H
Type	DC Solenoid Valve
Voltage Rating	24V DC
Current Rating	0.2A (Max)
Power Consumption	4.8W
Valve Type	Direct Acting
Flow Rate	Up to 50 L/min
Medium	Air, Neutral Gas
Operating Temp.	-10°C to +60°C
Connection Type	G1/4" Threaded Port
Coil Resistance	120Ω
Ingress Protection	IP65
Weight	Approx. 300g

Instructions for Use:

1. Installation:

   • Ensure the valve is installed in a location that allows for adequate ventilation and protection from environmental elements.
   • Connect the valve using the appropriate G1/4" threaded port fittings.

2. Electrical Connection:

   • Connect the solenoid coil to a 24V DC power supply ensuring correct polarity.
   • The red wire is typically positive (+), and the black wire is negative (-).

3. Operation:

   • When voltage is applied to the coil, the valve will energize and open, allowing fluid or gas to flow through.
   • Upon de-energizing the coil, the valve will close automatically due to the spring return mechanism.

4. Maintenance:

   • Regularly inspect the valve for any signs of wear or damage.
   • Clean the valve periodically to ensure optimal performance.

5. Safety Precautions:

   • Do not exceed the maximum operating temperature or pressure ratings.
   • Always disconnect power before performing maintenance or adjustments.
   • Ensure the medium flowing through the valve is compatible with its materials.

(For reference only)