Details

---

BUY SAB80C32 https://www.utsource.net/itm/p/1729014.html
High-Performance 8-Bit Single Chip Microcontroller

Parameter	Description	Value/Range
Device Type	Microcontroller	SAB80C32
Operating Voltage (Vcc)	Supply voltage for operation	5V
Clock Frequency	Internal or external clock speed	Up to 12 MHz
Flash Memory	Non-volatile memory for program storage	32 KB
RAM	Volatile memory for data storage	256 bytes
EEPROM	Non-volatile memory for data storage	512 bytes
I/O Pins	Number of input/output pins	32
ADC Channels	Analog-to-digital converter channels	8 channels, 10-bit resolution
UART	Serial communication interface	1 channel
SPI	Serial Peripheral Interface	Supported
I2C	Inter-Integrated Circuit communication	Supported
Timers	Hardware timers	2 x 16-bit
Operating Temperature	Temperature range for reliable operation	-40掳C to +85掳C
Package Type	Physical package type	DIP-40

Instructions for Use:

1. Power Supply:

   • Connect Vcc (5V) and GND pins properly. Ensure stable power supply to avoid malfunction.

2. Clock Configuration:

   • For external clock, connect crystal oscillator or signal generator to the designated pins.
   • For internal clock, configure the internal oscillator through software settings.

3. Program Upload:

   • Use an appropriate programmer compatible with the SAB80C32 to upload code.
   • Ensure correct baud rate and protocol settings for communication with the programmer.

4. Pin Configuration:

   • Configure I/O pins as inputs or outputs via software commands.
   • Refer to the datasheet for specific pin functions and configurations.

5. Peripheral Setup:

   • Initialize UART, SPI, and I2C interfaces using initialization routines in your program.
   • Set up ADC channels and configure timer settings according to application requirements.

6. Operating Environment:

   • Ensure that the operating temperature remains within the specified range to prevent damage or unreliable operation.

7. Development Tools:

   • Utilize development tools such as IDEs and debuggers that support the SAB80C32 for efficient programming and debugging.

For detailed information on each parameter and advanced configurations, refer to the official SAB80C32 datasheet and application notes.

(For reference only)