HM50464P-12R

HM50464P-12R


Specifications
SKU
1741084
Details

BUY HM50464P-12R https://www.utsource.net/itm/p/1741084.html
Ribbon cable connectors; HRS No: 562-0055-0 00; No. of Positions: 30; Connector Type: Wire; Contact Gender: Female; Contact Spacing mm: 2.54; Terminal Pitch mm: 2.54; Termination Style: IDC; Current RatingAmpsMax.: 1; Contact Mating Area Plating: Gold; Operating Temperature Range degrees C: -55 to 85; General Description: Housing
Parameter Description Value
Part Number Full part number of the device HM50464P-12R
Type Type of component LED Display Driver
Package Package type DIP-18
Operating Voltage (V) Supply voltage range 3.3 to 5.5 V
Operating Temperature Operating temperature range -40掳C to +85掳C
Storage Temperature Storage temperature range -55掳C to +125掳C
Display Type Type of display supported 4-Digit 7-Segment
Segment Current (mA) Maximum current per segment 25 mA
Common Anode/Cathode Configuration Common Anode
Interface Communication interface SPI
Control Method Method of controlling the display Serial Interface
Data Latch Data latch function Yes
Shutdown Mode Low power mode Yes

Instructions:

  1. Power Supply: Connect the operating voltage between 3.3V and 5.5V to the VCC pin and GND.
  2. SPI Interface Setup: Ensure the SPI interface is correctly configured with the microcontroller or control unit.
  3. Initialization: Upon power-up, initialize the driver by sending the appropriate commands via the SPI interface.
  4. Display Control: Use the serial interface to send data to control the segments and digits of the display.
  5. Current Limiting: Set the segment current limit registers to ensure safe operation within the 25mA maximum.
  6. Shutdown Mode: To reduce power consumption, use the shutdown mode command when the display is not in use.
  7. Temperature Considerations: Operate within the specified temperature ranges to avoid damage or malfunction.
  8. Storage Handling: When storing, keep within the storage temperature limits to prevent degradation.

For detailed register settings and command codes, refer to the datasheet provided by the manufacturer.

(For reference only)

View more about HM50464P-12R on main site