Details

---

BUY YPPD-J011C-F https://www.utsource.net/itm/p/1756418.html

Parameter	Description	Value
Part Number	Full part number	YPPD-J011C-F
Type	Type of device	Photoelectric Sensor
Operating Voltage	Supply voltage range	10 - 30 VDC
Current Consumption	Operating current	≤70 mA
Detection Distance	Maximum detection distance	500 mm
Response Time	Time to respond to changes	1 ms
Output Type	Type of output signal	NPN open collector
Output Current	Maximum output current	100 mA
Wiring Configuration	Wiring type	3-wire (Brown, Blue, Black)
Environmental Rating	Protection against environmental factors	IP67
Temperature Range	Operating temperature range	-25°C to 70°C
Mounting Method	Installation method	M8 threaded stud
Weight	Product weight	30 g

Instructions for Use:

1. Power Supply Connection: Connect the Brown wire to the positive terminal of the power supply and the Blue wire to the negative terminal.
2. Load Connection: Connect the load between the Black wire (output) and the positive terminal of the power supply.
3. Installation: Mount the sensor using the M8 threaded stud in a location where it can effectively detect objects within its specified detection distance.
4. Operation: Ensure the operating environment is within the specified temperature range (-25°C to 70°C). The sensor should be protected from excessive moisture or dust to maintain performance.
5. Maintenance: Regularly inspect the sensor for any physical damage or dirt accumulation on the lens that could affect performance. Clean with a soft cloth as needed.

(For reference only)