Details

---

BUY 1DI200Z-140 https://www.utsource.net/itm/p/1862528.html
POWER TRANSISTOR MODULE

Parameter	Value	Unit
Device Type	Diode, Fast Recovery	-
Maximum Repetitive Peak Reverse Voltage (VRRM)	1400	V
Maximum Average Rectified Output Current (IOAV)	200	A
Maximum RMS Current (IRMS)	141	A
Junction Temperature (TJ)	-55 to +175	°C
Storage Temperature (TSTG)	-55 to +150	°C
Forward Voltage Drop (VF) at IF = 20A	1.1	V
Reverse Recovery Time (trr)	35	ns

Instructions for Use:

1. Mounting and Handling: Ensure that the diode is handled carefully to avoid damage to the leads or body. Mount in a way that ensures proper heat dissipation if used under high current conditions.

2. Electrical Connections: Connect the diode ensuring correct polarity. The cathode (marked band) should be connected to the positive side of the circuit and the anode to the negative side.

3. Thermal Management: For applications where the diode will operate near its maximum current ratings, ensure adequate cooling to maintain junction temperature within specified limits.

4. Surge Currents: Be aware of transient conditions that might exceed the average forward current rating. Ensure that surge currents do not exceed the peak non-repetitive forward surge current rating.

5. Storage and Operating Temperature: Keep the diode within the specified storage and operating temperature ranges to prevent damage or degradation of performance.

6. Compliance with Standards: Ensure that the application complies with relevant safety and regulatory standards.

7. Testing: Before installation, it is advisable to test the diode using appropriate methods to verify its functionality and integrity.

(For reference only)