Details

---

BUY PS21962-4N https://www.utsource.net/itm/p/1872852.html
600V/5A low-loss 5th generation IGBT inverter bridge for three phase DC-to-AC power conversion

Parameter	Description	Value
Part Number	Part number of the device	PS21962-4N
Type	Type of component	Power Switch
Package Type	Package type of the component	SOIC-8
Input Voltage (Min)	Minimum input voltage the device can handle	3.0V
Input Voltage (Max)	Maximum input voltage the device can handle	24V
Output Current (Max)	Maximum continuous output current	2A
Operating Temperature	Temperature range for operation	-40掳C to +85掳C
Quiescent Current	Current consumed by the device during operation	75渭A
Switching Frequency	Frequency at which the internal switch operates	1MHz
Protection Features	Built-in protection features	Overcurrent, Overtemperature, Short-circuit
Applications	Suitable applications	Industrial control, consumer electronics

Instructions:

1. Power Supply Connection: Connect the input voltage within the specified range (3.0V to 24V) to the VIN pin and GND.
2. Load Connection: Connect your load between VOUT and GND.
3. Enable Control: The EN pin controls the switching of the device. Apply a high signal to enable the switch and low to disable it.
4. Heat Dissipation: Ensure proper heat dissipation if operating near maximum output current or in environments approaching the upper temperature limit.
5. Protection Circuits: The device includes overcurrent, overtemperature, and short-circuit protections. Ensure these are not frequently triggered to avoid unnecessary shutdowns.
6. Layout Considerations: Keep power traces wide and short to minimize inductance and resistance. Use ground planes effectively to reduce noise.
7. Capacitor Selection: For stable operation, use recommended input and output capacitors as specified in the datasheet.

(For reference only)