Details

---

BUY TXS0104EPWR https://www.utsource.net/itm/p/1890206.html
4-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN APPLICATIONS

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating condition	1.65		3.6	V
Input Voltage	VIN		-0.5		VCC+0.5	V
Output Voltage	VOUT		-0.5		VCC+0.5	V
Quiescent Current	IQ	VCC = 3.3V		2		渭A
Low Level Input Current	IIL	VIN = 0V	-1			渭A
High Level Input Current	IIH	VIN = VCC	1			渭A
Low Level Output Current	IOL	VOUT = 0V	-4			mA
High Level Output Current	IOH	VOUT = VCC	4			mA
Propagation Delay (Low to High)	tPLH	VCC = 3.3V, VOH = 70% VCC	2.8			ns
Propagation Delay (High to Low)	tPHL	VCC = 3.3V, VOL = 30% VCC	2.8			ns

Instructions for TXS0104EPWR

1. Power Supply Connection:

   • Connect the VCC pin to a power supply within the range of 1.65V to 3.6V.
   • Ensure the ground (GND) is properly connected.

2. Signal Routing:

   • Connect input signals to the IN pins and corresponding output signals to the OUT pins.
   • The device supports bidirectional signal transmission, so ensure that signal paths are correctly routed according to your application needs.

3. Handling Static Electricity:

   • Handle the TXS0104EPWR with care as it is sensitive to electrostatic discharge (ESD).
   • Use appropriate ESD protection measures during handling and installation.

4. Operating Temperature:

   • Ensure the operating temperature stays within the specified range (-40掳C to +85掳C).

5. Storage Conditions:

   • Store in a dry environment to prevent moisture damage.
   • Follow the storage guidelines provided by the manufacturer to maintain component integrity.

6. Mounting:

   • Solder the device using reflow soldering techniques recommended by the manufacturer.
   • Avoid excessive heat during soldering to prevent damage to the device.

7. Testing:

   • After mounting, verify the functionality by applying test signals and measuring outputs.
   • Check for proper voltage levels on VCC and GND pins to ensure stable operation.

(For reference only)