Details

---

BUY AD8532ARZ https://www.utsource.net/itm/p/4134696.html
Low Cost, 250 mA Output, Single-Supply Amplifiers

Parameter	Conditions	Min	Typ	Max	Unit
Supply Voltage	V+ to V-	2.7		5.5	V
Quiescent Current	Per Amplifier, VS = ±5V		0.8		mA
Input Offset Voltage			0.5		mV
Input Bias Current			1		pA
Input Voltage Noise	1 kHz		13		nV/√Hz
Slew Rate			1.5		V/μs
Bandwidth	-3 dB		1.6		MHz
Output Short-Circuit	Duration		Continuous
Operating Temperature	Commercial	0		70	°C
Operating Temperature	Industrial	-40		85	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified range (2.7V to 5.5V) to avoid damage to the device.

2. Installation:

   • Place the AD8532ARZ on a stable PCB with adequate grounding and power planes to minimize noise.

3. Biasing:

   • Connect the biasing components as recommended in the datasheet to maintain stability and performance.

4. Input Signals:

   • Keep input signals within the common-mode input voltage range to prevent distortion or clipping.

5. Output Load:

   • Ensure the output load does not exceed the maximum current capability of the amplifier.

6. Thermal Management:

   • For industrial temperature applications, ensure proper heat dissipation to maintain operational limits.

7. Testing:

   • Perform initial testing at room temperature and gradually extend to full operating temperature range.

8. Storage:

   • Store in a dry environment and handle with care to prevent electrostatic discharge (ESD) damage.

(For reference only)