Details

---

BUY ADAM27P16G https://www.utsource.net/itm/p/4140813.html

Parameter	Description	Value	Unit
Device Type	High-Speed ADC	ADAM27P16G	-
Resolution	Number of bits for ADC conversion	16	bits
Sampling Rate	Maximum speed at which the ADC can sample input signals	250	MSPS
Input Type	Type of input signal	Differential	-
Reference Voltage	Voltage used as reference for ADC conversion	2.048	V
Power Supply	Operating voltage range	1.8 to 3.3	V
Power Consumption	Typical power consumption	250	mW
Operating Temperature	Temperature range for reliable operation	-40 to +85	掳C
Package Type	Physical package type	TSSOP	-

Instructions:

1. Power Supply Setup: Ensure the power supply voltage is within the specified range (1.8V to 3.3V). Use appropriate decoupling capacitors near the power pins to minimize noise.

2. Reference Voltage Configuration: Connect the reference voltage pin to a stable 2.048V source. The accuracy and stability of this voltage directly impact the ADC's performance.

3. Input Signal Connection: Connect differential input signals to the ADC inputs. Ensure that the input signals do not exceed the common-mode voltage range.

4. Sampling Configuration: Configure the sampling rate according to your application requirements, keeping in mind the maximum supported rate of 250 MSPS.

5. Temperature Considerations: Operate the device within the specified temperature range (-40掳C to +85掳C) to ensure reliable performance. Avoid exposing the device to temperatures outside this range.

6. Layout Recommendations: Follow good PCB layout practices, including proper grounding, minimizing trace lengths for high-speed signals, and separating analog and digital sections to reduce interference.

7. Software Initialization: Initialize the ADC using the provided configuration registers or control logic as per the datasheet specifications. Ensure all settings are correctly configured before starting data acquisition.

(For reference only)