Details

---

BUY ADG707BRUZ https://www.utsource.net/itm/p/4172152.html
CMOS, +1.8 V to +5.5 V/
2.5 V, 2.5 Low-Voltage, 8-/16-Channel Multiplexers

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating Range	1.8		5.5	V
On-State Resistance	RON	VDD = 5V, TA = 25°C		4		Ω
Off Leakage Current	ILEAK	VDD = 5V, TA = 25°C			1	nA
Input Signal Voltage	VIN	Operating Range	-0.5		VDD+0.5	V
Switching Time	tSW	VDD = 5V, TA = 25°C		10		ns
Power Dissipation	PD	Continuous Operation			160	mW
Storage Temperature	TSTG		-65		150	°C
Operating Temperature	TOPR		-40		85	°C

Instructions for Use:

1. Power Supply: Ensure the supply voltage (VDD) is within the specified range of 1.8V to 5.5V.
2. Signal Handling: Keep input signal voltages (VIN) within -0.5V to VDD + 0.5V to prevent damage or erratic behavior.
3. Temperature Management: Operate the device within the temperature range of -40°C to 85°C for reliable performance. Storage should be between -65°C and 150°C.
4. Switching Performance: For optimal switching performance, operate at a typical switching time of 10ns when VDD is set to 5V.
5. Power Considerations: Monitor power dissipation to not exceed 160mW continuously.
6. Leakage Monitoring: Be aware of off-state leakage current, which should not exceed 1nA under standard conditions.
7. Resistance Awareness: The on-state resistance is typically around 4Ω at VDD = 5V and TA = 25°C, affecting load current capabilities.

Ensure all connections are secure and correct before applying power to the device. Always refer to the datasheet for detailed specifications and application notes.

(For reference only)