Details

---

BUY BTA08-600 https://www.utsource.net/itm/p/4302554.html
Standard Triac

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Repetitive Peak Off-State Voltage	VDRM			600		V
Repetitive Peak Reverse Voltage	VRSM			600		V
On-State Current (rms)	IT(RMS)	Tj = 100°C		8		A
Non-Repetitive Peak On-State Current	I TTSM	Tj = 100°C, Pulse Duration ≤ 1 ms		45		A
Gate Trigger Current	IGT	VGT = 12V	5		50	mA
Holding Current	IH		5		50	mA
On-State Voltage Drop	VT0	IT = 1.6A		1.2		V
Junction Temperature Range	Tj		-40		125	°C
Storage Temperature Range	Tstg		-40		125	°C

Instructions for Use:

1. Mounting and Handling:

   • Ensure the device is mounted on a heatsink if operating near maximum current ratings to maintain junction temperature within specified limits.

2. Electrical Connections:

   • Connect the gate terminal to the control circuit ensuring that the gate trigger current (IGT) exceeds the minimum required value for reliable turn-on.
   • Ensure all connections are secure and insulated to prevent short circuits.

3. Operating Conditions:

   • Do not exceed the repetitive peak off-state voltage (VDRM) or repetitive peak reverse voltage (VRSM).
   • Keep the on-state current (IT(RMS)) within the rated limit to avoid overheating and potential damage.
   • For pulse applications, ensure the non-repetitive peak on-state current (ITTSM) does not exceed the specified maximum for short pulses.

4. Environmental Considerations:

   • Operate the device within the specified junction and storage temperature ranges to ensure reliable performance and longevity.

5. Testing and Troubleshooting:

   • Regularly monitor the device's performance parameters such as on-state voltage drop (VT0) and holding current (IH) to detect any deviations from normal operation.
   • If the device fails to turn on or off reliably, check the gate trigger current (IGT) and ensure it meets the minimum requirements.

(For reference only)